IEI Technology IVS-300-BT-J1/4G, User Manual

Page: 36 / 110

IVS-300 Embedded System
Page 22
Figure 3-10: Knockouts for External Antennas
Step 3: Locate the half-size PCIe Mini slot for WLAN modules and the full-size PCIe Mini
slot for WWAN modules ( Figure 3-11 ).
Step 4: Remove the retention screw(s) for PCIe Mini card installation ( Figure 3-11 ).
Figure 3-11: WLAN and WWAN Card Slot Locations
Step 5: Line up the notch on the WLAN/WWAN module with the notch on the slot. Slide
the WLAN/WWAN module into the slot at an angle of about 20º.
Step 6: Secure the WLAN/WWAN module with the retention screw previously removed.
Step 7: Connect the RF cable(s) to the antenna connector(s) on the WLAN/WWAN
module ( Figure 3-12 ).