IEI Technology IVS-300-BT-J1/4G, User Manual

Page: 97 / 110

IVS-300 Embedded System
Page 83
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the IVS-300.
B.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
B.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.

Follow the electrostatic precautions outlined below whenever the device is
opened.

Make sure the power is turned off and the power cord is disconnected
whenever the IVS-300 is being installed, moved or modified.

To prevent the risk of electric shock, make sure power cord is
unplugged from wall socket. To fully disengage the power to the unit,
please disconnect the power cord from the power outlet. Refer servicing to
qualified service personnel. The power outlet shall be readily available and
accessible.

Do not apply voltage levels that exceed the specified voltage range .
Doing so may cause fire and/or an electrical shock. Use a power cord that
matches the voltage of the power outlet, which has been approved and
complies with the safety standard of your particular country.

Electric shocks can occur if the IVS-300 chassis is opened when it is
running. To avoid risk of electric shock, this device must only be connected to
a supply mains with protective earth.

Do not drop or insert any objects into the ventilation openings of the
IVS-300.