IEI Technology IVS-300-BT-J1/4G, User Manual

Page: 35 / 110

IVS-300 Embedded System
Page 21
7 NC 8 SIM_VCC
9 GND 10 SIM_CIO
11 CLK_PCIE_CLK_N 12 SIM_CLK
13 CLK_PCIE_CLK_P 14 SIM_RST
15 GND 16 NC
17 NC 18 GND
19 NC 20 NC
21 GND 22 PCIRST#
23 PCIE_RXN 24 VCC3
25 PCIE_RXP 26 GND
27 GND 28 VCC1.5
29 GND 30 SMB_CLK
31 PCIE_TXN 32 SMB_DATA
33 PCIE_TXP 34 GND
35 GND 36 USB_DATA_N
37 NC 38 USB_DATA_P
39 VCC3 40 GND
41 VCC3 42 NC
43 DUAL3G LED 44 NC
45 NC 46 NC
47 NC 48 VCC1.5
49 NC 50 GND
51 NC 52 VCC3
Table 3-1: PCIe Mini Slot (MINI-PCIE3) Pinouts
3.6 WLAN/WWAN Module Installation
To install the optional WLAN or WWAN module, please follow the steps below.
Step 1: Access the front side of the main board. See Section 3.4.
Step 2: Remove the knockout for antenna installation. The knockouts are located on the
rear panel of the IVS-300 as shown in Figure 3-10 .