IEI Technology IVS-300-BT-J1/4G, User Manual

Page: 28 / 110

IVS-300 Embedded System
Page 14
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the IVS-300
may result in permanent damage to the IVS-300 and severe injury to the
user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the WAFER series motherboard and the power module. (Dry climates are
especially susceptible to ESD.) It is therefore critical that whenever the IVS-300 is opened
and any electrical component handled, the following anti-static precautions are strictly
adhered to.

Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : When configuring the IVS-300, place it on an
anti-static pad. This reduces the possibility of ESD damaging the IVS-300.
3.2 Installation Precautions
During installation, be aware of the precautions below:

Read the user manual : The user manual provides a complete description of
the IVS-300, installation instructions and configuration options.

DANGER! Disconnect Power : Power to the IVS-300 must be disconnected
during the installation process. Failing to disconnect the power may cause
severe injury to the body and/or damage to the system.

Qualified Personnel : The IVS-300 must be installed and operated only by
trained and qualified personnel. Maintenance, upgrades, or repairs may only