IEI Technology IOWA-GX User Manual Download Page 154

Page: 154 / 212

IOWA-GX CPU Board

Page 136

NOTE

To reduce the chance of losing data, ALi imposes certain limitations on

the RAID configuration options. Parallel-ATA drives connected on the

same IDE channel cannot be selected as the members of a RAID 1

array. Avoid mixing Parallel-ATA and Serial-ATA disk drives in a RAID

1 array.

7.4.4 Stripe Size

Changing the stripe size effects RAID 0 arrays. Configurable options are:

64K (default)

32K

16K

Select a small stripe size if the I/Os to the hard drives are small and occur randomly.

Choose a larger stripe size if the I/Os are mostly large and come in sequential orders, e.g.,

A/V playback and editing applications. The default value should be appropriate for most

applications.

7.4.5 Delete RAID Setting & Partition

WARNING!

If a RAID configuration is deleted, all data previously stored on the

member drives of the RAID configuration will also be deleted.

Summary of Contents for IOWA-GX





















































































































































































































Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands

IEI Technology IOWA-GX, User Manual

Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands