manualshive.com logo in svg

IEI Technology IOWA-GX, User Manual

Share
Download
IEI Technology IOWA-GX User Manual Download Page 110

 

 

IOWA-GX CPU Board

 

Page 92 

Key 

Function 

F1 

General help, only for Status Page Setup Menu and Option 

Page Setup Menu 

F2 Item 

help 

F5 

Previous values for the page menu items 

F6 

Fail-safe defaults for the current page menu items 

F7 

Optimized defaults for the current page menu items 

F9 

Menu in BIOS 

F10 

Save changes and Exit BIOS 

Table 6-1: BIOS Navigation Keys 

6.1.3 Getting Help 

When 

F1

 is pressed a small help window describing the appropriate keys to use and the 

possible selections for the highlighted item appears. To exit the Help Window press 

E

SC

 or 

the 

F1

 key again. 

6.1.4 Unable to Reboot After Configuration Changes 

If the system cannot be booted after changes are made, restore the CMOS defaults. To 

restore the BIOS defaults, remove the battery, wait 5 seconds and then reinstall the 

battery. 

Summary of Contents for IOWA-GX





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands