IEI Technology IOWA-GX User Manual Download Page 119

Page: 119 / 212

IOWA-GX CPU Board

Page 101

6.3 Advanced BIOS Features

Use the

Advanced BIOS Features

menu (BIOS Menu 4) to configure the CPU and

peripheral device configuration options.

BIOS Menu 4: Advanced BIOS Features

Quick Power On Self Test [Enabled]

Use the

Quick Power On Self Test

option to speed up the POST after the computer is

turned on. If enabled, BIOS shortens or skips some POST check items.

Disabled

Normal POST occurs after the computer is turned on.

Enabled

(Default)

Quick POST occurs after the computer is turned on.

Boot From LAN Control [Disabled]

Use the

BOOT From LAN Control

option to enable the system to be booted from a

remote system.

Summary of Contents for IOWA-GX





















































































































































































































Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands

IEI Technology IOWA-GX, User Manual

Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands