IEI Technology IOWA-GX User Manual Download Page 111

Page: 111 / 212

IOWA-GX CPU Board

Page 93

6.1.5 Main BIOS Menu

Once the BIOS opens, the

Main Menu

(BIOS Menu 1) appears.

BIOS Menu 1: Award BIOS CMOS Setup Utility

NOTE:

The following sections will completely describe the menus listed below

and the configuration options available to users.

The following menu options are seen in BIOS Menu 1.

Standard CMOS Features

: Changes the basic system configuration.

Advanced BIOS Features

: Changes the advanced system settings.

Advanced Chipset Features

: Changes the chipset configuration features.

Integrated Peripherals

: Changes the settings for integrated peripherals.

Power Management Setup

: Configures power saving options.

Summary of Contents for IOWA-GX





















































































































































































































Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands

IEI Technology IOWA-GX, User Manual

Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands