IEI Technology IOWA-GX User Manual Download Page 120

Page: 120 / 212

IOWA-GX CPU Board

Page 102

Disabled

(Default)

The system cannot be booted from a remote system

through the LAN.

Enabled

The system can be booted from a remote system

through the LAN.

SATA Boot ROM Control [Disabled]

Use the

SATA Boot ROM Control

option to configure SATA IDE use in DOS mode.

Disabled

(Default)

Disables SATA IDE use in DOS mode.

Enabled

Enables SATA IDE use in DOS mode.

Boot Device

Use the

Boot Device

options to select the order of the devices the system boots from.

There are three boot device configuration options:

First Boot Device

[Default: Floppy]

Second Boot Device

[Default: HDD-0]

Third Boot Device

[Default: LS-120]

Using the default values, the system first looks for a FDD to boot from. If it cannot find an

FDD, it boots from a HDD. If both the FDD and the HDD are unavailable, the system boots

from a LS-120 drive.

Boot Device configuration options are:

Floppy

LS120

HDD-0

SCSI

CDROM

HDD-1

HDD-2

HDD-3

Summary of Contents for IOWA-GX





















































































































































































































Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands

IEI Technology IOWA-GX, User Manual

Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands