IEI Technology IOWA-GX User Manual Download Page 149

Page: 149 / 212

IOWA-GX CPU Board

Page 131

7.4 RAID Options

7.4.1 Create RAID 0 Striping for Performance

WARNING!

All data previously stored on the member drives of a RAID

configuration are

destroyed

during the RAID initialization process. If

“used” drives are used to create a RAID array, make sure the data has

been moved or backed up before creating a RAID array out of the disk

drives.

Step 1:

Select

“

Create RAID 0 Striping for Performance”

. Use the arrow keys to

highlight

Create RAID 0 Striping for Performance

and press

NTER

. A flashing

‘S’ appears on the

Drive Menu

where the member drives to be included in the

RAID 0 array can be chosen.

Step 2:

Select RAID array drive members

. Use the space bar to select members of the

RAID array. The flashing cursor changes to a lower case ‘s’ once any of the

connected disk drives has been selected. Follow the same method to select

another member drive.

Step 3:

Confirm

. The

Create RAID 0(Y/N)

confirm box appears. Press

Step 4:

Name the array

. Enter a nickname for the created array. Upper and lower case

alphabetic, numeric, space, and underscore characters are all applicable for

naming an array.

Step 0:

Summary of Contents for IOWA-GX





















































































































































































































Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands

IEI Technology IOWA-GX, User Manual

Search results

Summary of Contents for IOWA-GX

Reviews:

Brands by name

Popular brands