manualshive.com logo in svg

IEI Technology IMBA-XQ354S, User Manual

Share
Download
IEI Technology IMBA-XQ354S User Manual Download Page 69

 

 

IMBA-XQ354S Motherboard 

Page 53

4.3 CPU, CPU Cooling Kit and DIMM Installation 

 WARNING: 

A CPU should never be turned on without the specified cooling kit 

being installed. If the cooling kit (heat sink and fan) is not properly 

installed and the system turned on, permanent damage to the CPU, 

IMBA-XQ354S and other electronic components attached to the 

system may be incurred. Running a CPU without a cooling kit may also 

result in injury to the user. 

The CPU, CPU cooling kit and DIMM are the most critical components of the 

IMBA-XQ354S. If one of these component is not installed the IMBA-XQ354S cannot run. 

4.3.1 Socket LGA775 CPU Installation   

 NOTE: 

To enable Hyper-Threading Technology, the CPU, chipset and 

operating system must all support Hyper-Threading Technology. 

 

 WARNING: 

CPUs are expensive and sensitive components. When installing the 

CPU please be careful not to damage it in anyway. Make sure the CPU 

is installed properly and ensure the correct cooling kit is properly 

installed. 

The LGA775 socket is shown in 

7

Figure 4-1

. 

Summary of Contents for IMBA-XQ354S






















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands