IEI Technology IMBA-XQ354S, User Manual

Page: 26 / 181

IMBA-XQ354S Motherboard
Page 10
2.1 Anti-static Precautions
WARNING!
Failure to take ESD precautions during the installation of the
IMBA-XQ354S may result in permanent damage to the IMBA-XQ354S
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IMBA-XQ354S. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the IMBA-XQ354S, or any other electrical component is
handled, the following anti-static precautions are strictly adhered to.
ƒ
Wear an anti-static wristband : - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ
Self-grounding :- Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ
Use an anti-static pad : When configuring the IMBA-XQ354S, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
IMBA-XQ354S.
ƒ
Only handle the edges of the PCB :- When handling the PCB, hold the PCB
by the edges.
2.2 Unpacking Precautions
When the IMBA-XQ354S is unpacked, please do the following:
ƒ
Follow the anti-static precautions outlined in Section
86
2.1 .
ƒ
Make sure the packing box is facing upwards so the IMBA-XQ354S does not
fall out of the box.
ƒ
Make sure all the components shown in Section
8
2.3 are present.