IEI Technology IMBA-XQ354S User Manual Download Page 4

Page: 4 / 181

IMBA-XQ354S Motherboard

Page iv

Manual Conventions

WARNING!

Warnings appear where overlooked details may cause damage to the equipment or result

in personal injury. Warnings should be taken seriously. Warnings are easy to recognize.

The word “warning” is written as “

WARNING

,” both capitalized and bold and is followed by

text. The text is the warning message. A warning message is shown below:

WARNING:

This is an example of a warning message. Failure to adhere to warning

messages may result in permanent damage to the IMBA-XQ354S or

personal injury to the user. Please take warning messages seriously.

CAUTION!

Cautionary messages should also be heeded to help reduce the chance of losing data or

damaging the IMBA-XQ354S. Cautions are easy to recognize. The word “caution” is

written as “

CAUTION

,” both capitalized and bold and is followed. The text is the cautionary

message. A caution message is shown below:

CAUTION:

This is an example of a caution message. Failure to adhere to cautions

messages may result in permanent damage to the IMBA-XQ354S.

Please take caution messages seriously.

Summary of Contents for IMBA-XQ354S






















































































































































































Search results

Summary of Contents for IMBA-XQ354S

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-XQ354S, User Manual

Search results

Summary of Contents for IMBA-XQ354S

Reviews:

Brands by name

Popular brands