IEI Technology IMBA-XQ354S User Manual Download Page 117

Page: 117 / 181

IMBA-XQ354S Motherboard

Page 101

Power On

The system turns on

Last State

EFAULT

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.

Resume on Keyboard/Mouse [Disabled]

Use the

Resume on Keyboard/Mouse

BIOS option to enable activity on either the

keyboard or mouse to rouse the system from a suspend or standby state. That is, the

system is roused when the mouse is moved or a button on the keyboard is pressed.

Disabled D

EFAULT

Wake event not generated by activity on the

keyboard or mouse

Enabled

Wake event generated by activity on the keyboard or

mouse

Disabled D

EFAULT

Wake event not generated by an incoming call

Enabled

Wake event generated by an incoming call

Resume on PCI-Express WAKE# [Enabled]

Use the

Resume PCI-Express WAKE#

BIOS option to enable activity on the

PCI-Express WAKE# signal to rouse the system from a suspend or standby state.

Disabled

Wake event not generated by PCI-Express WAKE#

signal activity

Enabled D

EFAULT

Wake event generated by PCI-Express WAKE# signal

activity

Summary of Contents for IMBA-XQ354S






















































































































































































Search results

Summary of Contents for IMBA-XQ354S

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-XQ354S, User Manual

Search results

Summary of Contents for IMBA-XQ354S

Reviews:

Brands by name

Popular brands