IEI Technology IMBA-XQ354S User Manual Download Page 107

Page: 107 / 181

IMBA-XQ354S Motherboard

Page 91

UDMA3

Ultra DMA mode 3 selected with a maximum data transfer

rate of 44 MB/s (To use this mode, it is required that an

80-conductor ATA cable is used.)

UDMA4

Ultra DMA mode 4 selected with a maximum data transfer

rate of 66.6 MB/s (To use this mode, it is required that an

80-conductor ATA cable is used.)

UDMA5

Ultra DMA mode 5 selected with a maximum data transfer

rate of 99.9 MB/s (To use this mode, it is required that an

80-conductor ATA cable is used.)

S.M.A.R.T [Auto]

Use the

S.M.A.R.T

option to auto-detect, disable or enable Self-Monitoring Analysis and

Reporting Technology (SMART) on the drive on the specified channel.

S.M.A.R.T

predicts

impending drive failures. The

S.M.A.R.T

BIOS option enables or disables this function.

Auto

EFAULT

BIOS auto detects HDD SMART support.

Disabled

Prevents BIOS from using the HDD SMART feature.

Enabled

Allows BIOS to use the HDD SMART feature

32Bit Data Transfer [Enabled]

Use the

32Bit Data Transfer

BIOS option to enables or disable 32-bit data transfers.

Disabled

Prevents the BIOS from using 32-bit data transfers.

Enabled

EFAULT

Allows BIOS to use 32-bit data transfers on supported

hard disk drives.

Summary of Contents for IMBA-XQ354S






















































































































































































Search results

Summary of Contents for IMBA-XQ354S

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-XQ354S, User Manual

Search results

Summary of Contents for IMBA-XQ354S

Reviews:

Brands by name

Popular brands