IEI Technology IMBA-8654 User Manual Download

Page: 165 / 242

IMBA-8654 Motherboard

Page 147

No/Enab

led

PCI devices are informed that an ISA based Graphics

device is installed in the system so the ISA based

Graphics card functions correctly. This does not

necessarily indicate a physical ISA adapter card. The

graphics chipset can be mounted on a PCI card. Always

check with the adapter card manual first, before

modifying the default settings in the BIOS.

PCI IDE BusMaster [Enabled]

Use the

PCI IDE BusMaster

BIOS option to enable or prevent PCI IDE busmastering.

Disabled

Busmastering is prevented

Enabled D

EFAULT

IDE controller on the PCI local bus has mastering

capabilities

OffBoard PCI/ISA IDE Card [Auto]

Use the

OffBoard PCI/ISA IDE Card

BIOS option to select the

OffBoard PCI/ISA IDE

Card

Auto D

EFAULT

The location of the Off Board PCI IDE adapter card is

automatically detected by the AMIBIOS.

PCI Slot 1

PCI Slot 1 is selected as the location of the OffBoard

PCI IDE adapter card. Only select this slot if the

adapter card is installed in PCI Slot 1.

PCI Slot 2

PCI Slot 2 is selected as the location of the OffBoard

PCI IDE adapter card. Only select this slot if the

adapter card is installed in PCI Slot 2.

Summary of Contents for IMBA-8654



















































































































































































































































Search results

Summary of Contents for IMBA-8654

Reviews:

Related manuals for IMBA-8654

Brands by name

Popular brands

IEI Technology IMBA-8654, User Manual

Search results

Summary of Contents for IMBA-8654

Reviews:

Related manuals for IMBA-8654

Brands by name

Popular brands