IEI Technology IMBA-8654 User Manual Download

Page: 112 / 242

IMBA-8654 Motherboard

Page 94

The IMBA-8654 must be installed in a chassis with ventilation holes on the sides allowing

airflow to travel over the heat sink surface. In a system with an individual power supply

unit, the cooling fan of a power supply can also help generate airflow over the board

surface.

NOTE

IEI has a wide range of chassis available. Please contact your

IMBA-8654 vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about available chassis.

5.6 Internal Peripheral Device Connections

5.6.1 Peripheral Device Cables

The cables listed in

Table 5-5

are shipped with the IMBA-8654.

Quantity

Type

ATA 66/100 flat cable

Dual RS-232 cables

Single RS-232 cable

1 Dual

RS-422/485

cable

SATA drive cables

SATA drive power cable

Table 5-5: IEI Provided Cables

Summary of Contents for IMBA-8654



















































































































































































































































Search results

Summary of Contents for IMBA-8654

Reviews:

Related manuals for IMBA-8654

Brands by name

Popular brands

IEI Technology IMBA-8654, User Manual

Search results

Summary of Contents for IMBA-8654

Reviews:

Related manuals for IMBA-8654

Brands by name

Popular brands