IEI Technology IMB-H810-i2 User Manual Download Page 155

Page: 155 / 215

IMB-H810-i2 microATX Motherboard

Page 139

6.7 Audio Driver Installation

To install the Realtek High Definition (HD) Audio driver, please follow the steps below.

6.7.1 BIOS Setup

Step 1:

Enter the BIOS setup. To do this, reboot the system and press

during POST.

Step 2:

Go to the PCH Azalia Configuration submenu. Enable the

Azalia

option. Refer

Section 5.4.1.2

Step 3:

Press

F10

to save the changes and exit the BIOS setup. The system reboots.

Step 0:

6.7.2 Driver Installation

To install the audio driver please follow the steps below. To install the audio driver, please

do the following.

Step 1:

Access the driver list. (See

Section 6.2

)

Step 2:

Click “

5-Audio

” and select the folder which corresponds to the operating

system.

Step 3:

Double click the setup file.

Step 4:

The

InstallShield Wizard

is prepared to guide the user through the rest of the

process.

Step 5:

Once initialized, the

InstallShield Wizard

welcome screen appears

(

Figure 6-24

Summary of Contents for IMB-H810-i2
























































































































































































































Search results

Summary of Contents for IMB-H810-i2

Reviews:

Related manuals for IMB-H810-i2

Brands by name

Popular brands

IEI Technology IMB-H810-i2, User Manual

Search results

Summary of Contents for IMB-H810-i2

Reviews:

Related manuals for IMB-H810-i2

Brands by name

Popular brands