IEI Technology IMB-H810-i2 User Manual Download Page 204

Page: 204 / 215

IMB-H810-i2 microATX Motherboard

Page 188

Boot Option #1

remain the default setting to boot from the original OS.

Boot Option #2

select the boot from LAN option.

Step 4:

Save changes and exit BIOS menu.

Exit

Save Changes and Exit

Step 5:

Install the auto recovery utility into the system by double clicking the

Utility/AUTORECOVERY-SETUP.exe

in the One Key Recovery CD. This utility

MUST be installed in the system, otherwise, the system will automatically

restore from the factory default image every ten (10) minutes.

Step 6:

Restart the client system from LAN. If the system encounters a Blue Screen of

Death (BSoD) or a hang for around 10 minutes, it will automatically restore from

the factory default image. The following screens will show when the system

starts auto recovering.

Summary of Contents for IMB-H810-i2
























































































































































































































Search results

Summary of Contents for IMB-H810-i2

Reviews:

Brands by name

Popular brands

IEI Technology IMB-H810-i2, User Manual

Search results

Summary of Contents for IMB-H810-i2

Reviews:

Brands by name

Popular brands