IEI Technology IMB-H810-i2 User Manual Download Page 121

Page: 121 / 215

IMB-H810-i2 microATX Motherboard

Page 105

Parity [None]

Use the

Parity

option to specify the parity bit that can be sent with the data bits for

detecting the transmission errors.

None D

EFAULT

No parity bit is sent with the data bits.

Even

The parity bit is 0 if the number of ones in the data

bits is even.

Odd

The parity bit is 0 if the number of ones in the data

bits is odd.

Mark

The parity bit is always 1. This option does not

provide error detection.

Space

The parity bit is always 0. This option does not

provide error detection.

Stop Bits [1]

Use the

Stop Bits

option to specify the number of stop bits used to indicate the end of a

serial data packet. Communication with slow devices may require more than 1 stop bit.

1 D

EFAULT

Sets the number of stop bits at 1.

Sets the number of stop bits at 2.

Summary of Contents for IMB-H810-i2
























































































































































































































Search results

Summary of Contents for IMB-H810-i2

Reviews:

Brands by name

Popular brands

IEI Technology IMB-H810-i2, User Manual

Search results

Summary of Contents for IMB-H810-i2

Reviews:

Brands by name

Popular brands