manualshive.com logo in svg

IEI Technology IMB-H810-i2, User Manual, Page: 87 / 215

Share
Download
IEI Technology IMB-H810-i2 User Manual Download Page 87

 

 

IMB-H810-i2 microATX Motherboard 

Page 71

 

Figure 4-20: VGA Connector 

Step 4: 

Secure the connector

. Secure the DB-15 VGA connector from the VGA 

monitor to the external interface by tightening the two retention screws on either 

side of the connector.

 

Step 0:

 

 

4.6 IPMI Setup Procedure 

The IMB-H810-i2 features Intelligent Platform Management Interface (IPMI) that helps 

lower the overall costs of server management by enabling users to maximize IT resources, 

save time and manage multiple systems. The IMB-H810-i2 supports IPMI 2.0 through the 

optional iRIS-2400 module. Follow the steps below to setup IPMI.   

4.6.1 Managed System Hardware Setup 

The hardware configuration of the managed system (IMB-H810-i2) is described below.   

Step 1: 

Install an iRIS-2400 module to the IPMI module socket (refer to 

Section 4.2.4

). 

Summary of Contents for IMB-H810-i2
























































































































































































































Reviews:

No comments