IEI Technology IMB-H810-i2 User Manual Download Page 101

Page: 101 / 215

IMB-H810-i2 microATX Motherboard

Page 85

Enable one core in the processor package.

Intel Virtualization Technology [Disabled]

Use the

Intel Virtualization Technology

option to enable or disable virtualization on the

system. When combined with third party software, Intel® Virtualization technology allows

several OSs to run on the same system at the same time.

Disabled D

EFAULT

Disables Intel Virtualization Technology.

Enabled

Enables Intel Virtualization Technology.

EIST [Enabled]

Use the

EIST

option to enable or disable Enhanced Intel SpeedStep® Techonology

(EIST).

Disabled

Disables Enhanced Intel SpeedStep®

Techonology.

Enabled D

EFAULT

Enables Enhanced Intel SpeedStep®

Techonology.

Summary of Contents for IMB-H810-i2
























































































































































































































Search results

Summary of Contents for IMB-H810-i2

Reviews:

Related manuals for IMB-H810-i2

Brands by name

Popular brands

IEI Technology IMB-H810-i2, User Manual

Search results

Summary of Contents for IMB-H810-i2

Reviews:

Related manuals for IMB-H810-i2

Brands by name

Popular brands