manualshive.com logo in svg

IEI Technology IMB-H810-i2, User Manual

Share
Download
IEI Technology IMB-H810-i2 User Manual Download Page 178

 

 

IMB-H810-i2 microATX Motherboard

Page 162 

C.2.5 Create Factory Default Image 

 NOTE: 

Before creating the factory default image, please configure the system 

to a factory default environment, including driver and application 

installations.  

To create a factory default image, please follow the steps below.   

Step 1: 

Turn on the system. When the following screen displays (

Figure C-10

), press 

the <

F3

> key to access the recovery tool. The message will display for 10 

seconds, please press F3 before the system boots into the operating system. 

 

Figure C-10: Press F3 to Boot into Recovery Mode 

Step 2: 

The recovery tool menu appears. Type <

4

> and press <

Enter

>. (

Figure C-11

) 

 

Figure C-11: Recovery Tool Menu 

Step 3: 

The About Symantec Ghost window appears. Click 

OK

 button to continue. 

Summary of Contents for IMB-H810-i2
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands