IEI Technology HYPER-BW, User Manual

Page: 13 / 102

HYPER-BW
Page 2
1.1 Introduction
Figure 1-1: HYPER-BW
The HYPER-BW is a PICO-ITX motherboard. It accepts an Intel® Pentium®/Celeron®
on-board SoC and supports one 204-pin 1333/1600 MHz single-channel DDR3L SDRAM
unbuffered SO-DIMM module up to 8 GB.
The HYPER-BW includes two mini HDMI ports. Expansion and I/O include one USB 2.0
connector and one USB 3.0 connector on the rear panel, two USB 2.0 connectors by pin
header and one SATA 6Gb/s connector. Serial device connectivity is provided by one
internal RS-232 connector. One RJ-45 Ethernet connector provides the system with
smooth connections to an external LAN.
1.2 Model Variations
The model variations of the HYPER-BW Series are listed below.
Model No. SoC
HYPER-BW-N4
Intel® Pentium® 14nm quad-core N3710 up to 2.56GHz (6W)
HYPER-BW-N3
Intel® Celeron® 14nm quad-core N3160 up to 2.24GHz (6W)
HYPER-BW-N2
Intel® Celeron® 14nm dual-core N3060 up to 2.48GHz (6W)
HYPER-BW-N1 Intel® Celeron® 14nm dual-core N3010 up to 2.24GHz (4W)
HYPER-BW-E8-ECO Intel® Celeron® 14nm quad-core x5-E8000 up to 2.00GHz (5W)
Table 1-1: HYPER-BW Model Variations