manualshive.com logo in svg

IEI Technology HYPER-BW, User Manual

Share
Download
IEI Technology HYPER-BW User Manual Download Page 59

 

 

HYPER-BW 

 

Page  48 

5.3.1

 

ACPI Settings  

The 

ACPI Settings

  menu (

BIOS Menu 3

) configures the Advanced Configuration and 

Power Interface (ACPI) options. 

Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. 

 

Advanced 

 

 

 

 

 

 

 

ACPI Settings 

 

ACPI Sleep State 

[S3 (Suspend to RAM]

 

 

 

 

---------------------- 

 



: Select Screen 

↑

 

↓

: Select Item 

Enter Select 

+/-: Change Opt. 

F1:  General Help 

F2:  Previous Values 

F3:  Optimized Defaults 

F4:  Save & Exit 

ESC: Exit 

Version 2.17.1249. Copyright (C) 2016 American Megatrends, Inc. 

BIOS Menu 3: ACPI Configuration

 

 

ACPI Sleep State [S3 only  (Sus pend to RAM)] 

The fields in 

ACPI Sleep State

 option cannot be changed. 

 

S3  (Suspend to 
RAM) 

D

EFAULT

 

The caches are flushed and the CPU is powered 
off. Power to the RAM is maintained. The 
computer returns slower to a working state,  but 
more power is saved. 

Summary of Contents for HYPER-BW







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands