manualshive.com logo in svg

IEI Technology eKINO-945GSE, User Manual, Page: 100 / 215

Share
Download
IEI Technology eKINO-945GSE User Manual Download Page 100

 

 

eKINO-945GSE Motherboard 

Page 84 

5.10.1 LAN Connection (Single Connector)   

There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection 

to an external network. To connect a LAN cable with an RJ-45 connector, please follow 

the instructions below. 

Step 6: 

Locate the RJ-45 connectors

. The locations of the USB connectors are shown 

in 

Chapter 4

. 

Step 7: 

Align the connectors. 

Align the RJ-45 connector on the LAN cable with one of 

the RJ-45 connectors on the eKINO-945GSE. See 

9

Figure 5-12

. 

 

Figure 5-12: LAN Connection 

Step 8: 

Insert the LAN cable RJ-45 connector.

 Once aligned, gently insert the LAN 

cable RJ-45 connector into the onboard RJ-45 connector.

 

Step 0:

 

5.10.2 PS/2 Y-Cable Connection 

The eKINO-945GSE has a PS/2 connector on the external peripheral interface panel. The 

dual PS/2 connector is connected to the PS/2 Y-cable that came with the eKINO-945GSE. 

One of the PS/2 cables is connected to a keyboard and the other to a mouse to the 

system. Follow the steps below to connect a keyboard and mouse to the eKINO-945GSE. 

Summary of Contents for eKINO-945GSE
























































































































































































































Reviews:

No comments