ERROR TEXT DISPLAYED
ON PRINTER
ERROR DESCRIPTION
SOLUTION BY CATEGORY
ID Card Printer - User Manual
4:14 While moving the card from the
rear
sensor
to
the
standby
position, it took too long for the
rear
sensor
to
unblock.
4:15 While moving a card from the
flipper into the smart encoder, it
took too long for the smart
extract
sensor
to
trigger.
This
may mean that there is no
encoder
actually
fitted.
4:16 While feeding a card past a
sensor,
and
having
seen
the
card reach that sensor, it took too
long
to
unblock.
4:17 While moving the card into
position
for
a
printing
or
encoding
operation,
it
took
too
long for the reference edge of
the card to move in front of the
sensor
used
for
positioning.
In
the
case
of
extended
mono
prints,
this
means
the
mid
sensor took too long to block.
In other cases, this means it took
too long for the rear sensor to
unblock.
4:18 While moving the card into
position
for
a
printing
or
encoding
operation,
it
took
too
long for the reference edge of
the card to move behind the
sensor
used
for
positioning.
In
the
case
of
extended
mono
prints,
this
means
the
mid-
33
