ID Card Printer - User Manual
42
ERROR TEXT DISPLAYED
ON PRINTER
ERROR DESCRIPTION
SOLUTION BY CATEGORY
12:3 While feeding a card from the
hopper,
the
front
sensor
blocked
before
the
mid
one.
12:4 While feeding a card from the
hopper,
the
front
sensor
blocked
before
the
rear
one.
12:5 While trying to feed a card from
the
hopper,
the
mid
sensor
triggered
before
the
front
one.
13
INTERNAL ERROR
13:1 The printhead took too long to
reach
a
temperature
suitable
for
printing.
There
may
be
a
fault
with
the
printhead
temperature
sensor.
13:2 The mag PCB MCU reported
that
an
error
occurred
while
trying to carry out an operation
or
interpret
a
command.
13:3 The mag driver reported that
an
error
occurred
while
trying
to
carry
out
an
operation.
13:4
Communication
with
the
engine
microcontroller
failed.
If
rebooting
the
printer
does
not
fix
this
problem,
try
updating
the
firmware.
If
that
does
not
work,
there
is
probably
a
hardware
fault.
