IDT Digital Encoder Plus, User Manual

Page: 86 / 98

To adjust the integration time of the deviation measurement:
1.
Set the arrow of your mouse on the yellow triangle located to
the right of the " User Time " scale
2.
Stays clicked on your mouse and move the cursor up or down to
get the desired value. This value will be displayed to the right of
the cursor. (In the example above: 15 mn)
3.
Double click on the value , it will be selected and you can
set the value desired from your digital keyboard.
The Displays of the MPX Guard:
The MPX Guard Plug-In has 3 horizontal display scales which allow you to control
with precision all the parameters.
MPX Attenuation:
This scale graded from right to left , indicates the instantaneous rate of
attenuation applied to the power by the MPX Guard . The value is displayed
digitally above and the red liner moves in real time from right to left to show you the
applied rate.
The maximum point attained by the line stays displayed by a red vertical bar. You
can, thus, leave the MPX Guard "in surveillance" mode and know the maximum
level of attenuation applied while you are away.
To reset to the red bar indicating the maximum value attained to zero click " Reset "
located to the right of the " MPX Attenuation " scale.
MPX Power Fast:
This scale indicates the power at the output of the Processor instantaneously. The
value is displayed digitally above and the yellow line moves in real time to indicate
the current value.
The maximum point attained by the line remains on display by a red vertical bar.
As a result you can let the " MPX Guard " watch over the signal and find the
maximum value obtained while you were away.
To reset to zero the red bar shows the maximum value attained then click on
" Reset " located to the right of the " MPX Power Fast " scale.
86