IDT Digital Encoder Plus User Manual Download Page 54

Page: 54 / 98

The Upgrader will display the information concerning the progression of the upgrade.

NB: Most of the upgrades include the reprogramming of the components of the

unit. There will be a cut in the audio during the upgrade. Make sure, then,

that your processor is not on air while it is being upgraded.

The upgrades also have an effect on the firmware of the unit and will delete

all the data stored in the processor. IDT Sound Processing Corporation has
tried, as much as possible, to maintain the compatibility of presets between 2

versions but this is not always possible. We, therefore, strongly recommend

you test the presets created before putting them on air.

Click next if you accept the warnings displayed.

Summary of Contents for Digital Encoder Plus



































































































Search results

Summary of Contents for Digital Encoder Plus

Reviews:

Related manuals for Digital Encoder Plus

Brands by name

Popular brands

IDT Digital Encoder Plus, User Manual

Search results

Summary of Contents for Digital Encoder Plus

Reviews:

Related manuals for Digital Encoder Plus

Brands by name

Popular brands