Page 19 of 68
VL-HP
Service
& Operation Manual
U.S. TAX STAMPING
EQUIPMENT
Manufactured by United Silicone
an ITW company
5)
The number of stamps should now be entered on the touch screen by touching the text
box on the screen for Stamps Remaining and use the number pad to enter the stamps.
The number should be rounded down to the nearest 10. If a roll has a remaining
count of 301 the machine will not properly apply stamps to the first or last carton.
When the operator rounds down to the nearest 10 the count entered will be 300 and
the machine will end the roll on the last stamp. The old stamp should be skipped at
the start of the roll and saved for hand stamping.
6)
Pull the Emergency stop knob out two position to activate paper tension and jog
modes
7)
Jog carrier to position the next available stamp under stamp iron and input the display
the stamp present / no stamp present by touching “left stamp” “middle stamp” “right
stamp”
8)
Touch “Jog away” so the back row of desired stamps is behind the brass roller and the
front roll of stamps is visible in front of the brass roller. Touch “index” (upper right)
to locate stamps under stamp iron.
9)
Press the “main” button to return to the “main screen”.
10)
Press reset button and screen should display “machine ready to run”.
Summary of Contents for VL-HP
Page 2: ......