Page 31 of 68
VL-HP
Service
& Operation Manual
U.S. TAX STAMPING
EQUIPMENT
Manufactured by United Silicone
an ITW company
8.1.3 Temperature Setup
FIELD
DESCRIPTION
GLUE HEAT
Toggles glue heat on and off. There is a large heat mass present heat
will remain after the control is disabled
HEAD 1 HEAT
Toggles glue heat on and off. There is a large heat mass present heat
will remain after the control is disabled
HEAD 2 HEAT
Toggles glue heat on and off. There is a large heat mass present heat
will remain after the control is disabled. Not displayed on single
head systems.
HEAD 3 HEAT
Toggles glue heat on and off. There is a large heat mass present heat
will remain after the control is disabled. Not displayed on single or
tandem head systems
SET POINT
Brings up a key pad to enter the desired operation temperature for
the selected heater
TEMP
Displays the current temperature reading of the heater listed above
TIP TEMP
Displays the current temperature of the glue tip
FARRENHEIT/CELSIUS
Toggles between Temperature ranges. When the range is changed
the temperature settings must also be adjusted to the new range
Pre-Heat Setup NEXT
Displays the screen for configuring the starting and stopping time for
the heat.
Summary of Contents for VL-HP
Page 2: ......
