SWC-2000 User
’s Guide
95
Problem
Cause/Check item/Solution
Page
●
Sending control command function
Control command is not
sent.
Ensure that the registered control command and the number of
bytes are correct. Devices requiring delimiters may not execute
commands if the delimiters are not sent. If the set number of bytes
is not correct, the control command is not sent completely or
unnecessary data is sent after the control command.
Is the registered control command linked to the desired control
command execution condition?
Is the communication operation mode set to “TRANSMITTER”
mode?
In order to send the control command, set the communication port
to “TRANSMITTER” mode.
If using LAN, set the IP address and other settings of the
connected device.
●WEB menu
Settings are not saved or
applied to the operation.
For some WEB
menus, settings are not applied until the “SEND”
button or ”SET” button is clicked.
If additional assistance is required, please perform the following tests and then contact us.
1.
The problem occurs at all connectors?
2.
Connect the devices using genuine cables without connecting the SWC-2000.
The problem still cannot be solved?
