MSD-62 series Command Guide
78
@GCF / @SCF
RS-232C communication mode
Getting
Command
@GCF
Response
@GCF, mode_1,
…
, mode_11
Setting
Command
@SCF, port, mode
Response
@SCF, port, mode
Parameter
mode: Operation mode
mode_1: Operation mode of RS-232C connector
mode_2: Operation mode of HDBaseT input connector IN5
mode_3: Operation mode of HDBaseT input connector IN6
mode_4 to mode_11:Operation mode of HDBaseT output connector OUT1 to
OUT8
0 = RECEIVER mode [Default], 1 = TRANSMITTER mode
port: RS-232C channel
0 = All channels,
1 = RS-232C connector,
2 = IN5,
3 = IN6,
4 = OUT1,
5 = OUT2,
6 = OUT3,
7 = OUT4,
8 = OUT5,
9 = OUT6,
10 = OUT7,
11 = OUT8
Getting
example
Command
Response
@GCF
@GCF,1,1,1,1,1,1,1,1,1,1,1
Description Getting the set operation mode
TRANSMITTER mode
Setting
example
Command
Response
@SCF,1,1
@SCF,1,1
Description Setting RS-232C connector to TRANSMITTER mode.
Remarks
These commands are only for RS-232C.
If IP address or RS-232C communication setting is changed, the communication
may be disabled. Change the environmental settings based on the MSD settings.
