MSD-62 series Command Guide
54
@GFF / @SFF
Video switching effect
Getting
Command
@GFF
Response
@GFF, switching_1, switching_2, switching_3,
・・・
, switching_8
Setting
Command
@SFF, ch_1, switching_1 (, ch_2, switching_2
・・・
)
Response
@SFF, ch_1, switching_1 (, ch_2, switching_2
・・・
)
Parameter
switching_1-8: Video switching effect
0 = CUT,
1 = FADE OUT/IN,
2 = FADE OUT/IN [Default],
3 = L
EFT→RIGHT WIPE,
4 =
RIGHT→LEFT WIPE,
5 =
TOP→BOTTOM WIPE,
6 =
BOTTOM→TOP WIPE
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
Getting
example
Command
Response
@GFF
@GFF,0,0,0,0,1,1,1,1
Description Getting input channel switching effect.
OUT1 to OUT4: CUT, OUT5 to OUT8: FADE OUT/IN
Setting
example
Command
Response
@SFF,1,1
@SFF,1,1
Description Setting OUT1 switching effect to FADE OUT/IN.
Remarks
An error occurs if this menu is set to one of “3” to “6” (WIPE) while video
combination mode is enabled.
@GFT / @SFT
Video switching speed
Getting
Command
@GFT
Response
@GFT, time_1, time_2, time_3,
・・・
, time_8
Setting
Command
@SFT, ch_1, time_1 (, ch_2, time_2
・・・
)
Response
@SFT, ch_1, time_1 (, ch_2, time_2
・・・
)
Parameter
time_1-8: Switching speed
100 = 0.1 sec. to 2000 = 2 sec.
[Default] 350 = 0.35 sec.
Set the value by 10 ms. If you set a value other than 0 for the lower 1 digits, these
values will be rounded down. (For example, if you set it to 395, the speed is set to
390 ms.)
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
Getting
example
Command
Response
@GFT
@GFT,400,400,400,400,350,350,350,350
Description Getting the set switching speed of video input channel.
OUT1 to OUT4: 400 ms, OUT5 to OUT8: 350 ms
Setting
example
Command
Response
@SFT,1,400
@SFT,1,400
Description Setting OUT1 switching time to 400 ms.
Remarks
-