MSD-62 series Command Guide
69
@GAT / @SAT
Test tone
Getting
Command
@GAT
Response
@GAT, tone_1, speaker_1, tone_2, speaker_2, tone_3, speaker_3,
･･･
, tone_8,
speaker_8
Setting
Command
@SAT, ch_1, tone_1, speaker_1 (, ch_2, tone_2, speaker_2
･･･
)
Response
@SAT, ch_1, tone_1, speaker_1 (, ch_2, tone_2, speaker_2
･･･
)
Parameter
tone_1-8: Test tone
0 = OFF [Default], 1 = 1 kHz, 2 = 400 Hz
speaker_1-8: Speaker
0 = ALL [Default],
1 = FRONT L/R,
2 = REAR L/R,
3 = REAR L/R CENTER,
4 = FRONT LEFT,
5 = FRONT RIGHT,
6 = LOW FREQUENCY EFFECT,
7 = FRONT CENTER,
8 = REAR LEFT,
9 = REAR RIGHT,
10 = REAR LEFT CENTER,
11 = REAR RIGHT CENTER
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
Getting
example
Command
Response
@GAT
@GAT,2,1,2,1,2,1,2,1,0,0,0,0,0,0,0,0
Description Getting the set test tone output.
OUT1 to OUT4: Outputs test tone (400 Hz) to FRONT L/R.
OUT5 to OUT8: Not output test tone.
Setting
example
Command
Response
@SAT,1,1,0
@SAT,1,1,0
Description Setting OUT1 to output test tone (1k Hz) to all speakers.
Remarks
－
