IDK MSD-6203, Command Reference Manual

Page: 41 / 120

MSD-62 series Command Guide
41
@GHE / @SHE HDCP input enabled/disabled
Getting Command @GHE
Response @GHE, hdcp_1, hdcp_2, hdcp_3, hdcp_4,
･･･
, hdcp_8
Setting Command @SHE, ch_1, hdcp_1 (, ch_2, hdcp_2
･･･
)
Response @SHE, ch_1, hdcp_1 (, ch_2, hdcp_2
･･･
)
Parameter hdcp_1-8 : HDCP input enabled/disabled
0 = DISABLE, 1 = ENABLE
[Default] ENABLE
ch_1-8: Input channel
0 = All digital inputs, 1 = IN1 to 8 = IN8
Getting
example
Command
Response
@GHE
@GHE,1,1,0,1,1,1,1,1
Description Getting HDCP input enabled/disabled.
IN3: disables HDCP input, other input channels: enables HDCP input
Setting
example
Command
Response
@SHE,1,0
@SHE,1,0
Description Setting IN1 HDCP input to be disabled.
Remarks These commands are only for digital input.
IN7 and IN8 are available only if “1” (Digital signal) is selected for “ @GIN / @SIN
Signal selection of DVI input connector ”. If “0” (Analog signal) is selected, “-1”
is returned.
@GAI / @SAI Analog input type
Getting Command @GAI
Response @GAI, type_1, type_2
Setting Command @SAI, ch_1, type_1 (, ch_2, type_2)
Response @SAI, ch_1, type_1 (, ch_2, type_2)
Parameter type_1-2: Signal type
0 = AUTO [Default], 1 = RGB, 2 = YPbPr,
3 = VIDEO AUTO, 4 = VIDEO, 5 = Y/C
ch_1-2: Input channel
0 = All analog inputs, 7 = IN7, 8 = IN8
Getting
example
Command
Response
@GAI
@GAI,0,2
Description Getting signal type of analog input.
IN7: AUTO, IN8: YPbPr
Setting
example
Command
Response
@SAI,0,2
@SAI,0,2
Description Setting the signal type of IN7 and IN8 to YPbPr.
Remarks These commands are only for analog input.
IN7 and IN8 are available only if “0” (Analog signal) is selected for “ @GIN / @SIN
Signal selection of DVI input connector ”. If “1” (Digital signal) is selected, “-1” is
returned.