MSD-62 series Command Guide
119
@GES
Monitor’s EDID
Getting
Command
@GES, channel, mode
Response
@GES, channel, mode, status_1 (, status_2, status_3
･･･
)
Parameter
channel: Output connector
1 = OUT1 to 8 = OUT8
mode: Statuses to be gotten
0 = All of 1 to 4,
1 = Monitor’s name,
2 = Resolution and dot clock,
3 = HDMI support status, sampling structure, and color depth
*1
,
4 = Audio support status and sampling frequency, bit length, the number of
channels, and support status of compressed audio *
2
status_1-4: Status
*1
For sink device that does not support HDMI, “DVI” is returned.
For sink device that supports HDMI, “HDMI” is returned, and then supported
sampling structures (RGB, YCbCr 4: 2: 2, YCbCr 4: 4: 4, and YCbCr 4: 2: 0,
separated with “/”) and supported color depths (24, 30, and 36, separated
with “/”) are replied in that order.
*2
For sink device that does not support audio, “AUDIO NOT SUPPORT” is
returned. For sink device that supports audio, “LINEAR PCM” is returned,
and then supported sampling frequencies (32, 44.1, 48, 88.2, 96, 176.4, and
192, separated with “/”), bit length (16, 20, and 24, separated with “/”), the
number of channels (one of 1 to 8), and “COMPRESSED AUDIO
SUPPORT” (if compressed audio is supported) are replied in that order.
Getting
example
Command
Response
@GES,1,0
@GES,1,0,MSD-6208,1920x1080 148.50MHz,DVI,AUDIO NOT SUPPORT
Description Getting the EDID of the sink device connected to OUT1.
・
Monitor name: MSD-62008
・
Resolution: 1920x1080
・
Dot clock: 148.50 MHz
・
HDMI: Not supported
・
Audio: Not supported
Remarks
－
@GIV
Version
Getting
Command
@GIV
Response
@GIV, id, ver
Parameter
id : Model number
ver : Firmware version
Getting
example
Command
Response
@GIV
@GIV,MSD-6208,1.00
Description Getting the product information.
Model number and firmware version are replied.
Remarks
－
