Idex Hale Sam, Operation Installation Maintenance Manual

Page: 113 / 141

97
Figure 115. Closing A CAFS Discharge Sequence
NOTES
If only one CAFS discharge is open, the FOAM OFF and CLOSE LINE buttons activate
automatically (the same as a preset would). No confirmation is required.
If more than one CAFS discharge is open the FOAM OFF confirmation popup window
appears (See Figure 108, page 91) and then the CLOSE LINE confirmation popup win-
dow appears (See Figure 108, page 91).
If a swipe fails, times out, misses the target, or the operator only touches and releases
the button; the applicable confirmation popup window appears (see FOAM OFF and
CLOSE LINE reference from above). Touch the YES button to complete the action or
the NO button to make no change.
On the SmartCAFS display, AIR is turned off when only the icon on the right-hand side of the
display is illuminated (see Figure 116, SmartCAFS Display With SAM FOAM ONLY Button Acti-
vated); if FOAM is also turned off the
icon on the left-hand side of the display is grayed out
(see Figure 116).
Figure 116. SmartCAFS Display
If ONLY one CAFS discharge is active when that discharge is closed, FOAM is turned off (grayed
out
) and AIR remains on (illuminated ).