iDect Z10 Conference series User Manual Download Page 33

Page: 33 / 35

TROUBLESHOOTING

If you have difficulty with your phone, please try the suggestions listed below.

Problem Cause

Solutions

No dialing tone when pressing <TALK

ON> key

a. The connection cord of the base

station is not plugged in.

b. The adapter cord is not plugged in

correctly in the base station.

c. The line is busy, as another

handset is being used.

d. The line cord supplied with the

phone is not being used.

a. Check the connections. Unplug

and plug back in the mains.

Check that the telephone line cord

has been plugged into the base

station and the phone socket.

b. Check the base station plug and

the 220V plug (remove and plug-

in).

c. Wait until the line is unoccupied.

d. Use the original connection cord.

When connected to a PBX, no and/or

wrong connection after dialing.

Dialing prefix is needed.

Insert the dialing prefix

"Searching"

is displayed.

Base station out of range.

Base station not connected to mains.

Reduce the range.

Connect base station to mains.

The call does not work.

Service not activated or wrong

operator or wrong setting

Check your Subscription with network

or change the dial mode.

No display.

Empty battery

Recharge battery

Please contact the technical support of the network provider for further information.
This telephone is not equipped with a grounding function! Therefore some of the

functions may be limited when used in PBX systems.

Technical Support

Please read out the serial number of this telephone when calling the Help Line.

The serial number can be found in the battery compartment after removing the batteries.

For technical support, call Binatone Help Line Customer Service at 0845 345 9677

Battery Information

Power Adapter Information

Battery Type

NiMH (Rechargeable battery)

Voltage Rating

600mAh 1.2V

Size AAA

Charger Adapter

Rating

INPUT: AC 230V 50Hz 45mA

OUTPUT: DC 6V 200mA 1.2VA

INPUT: AC 230V 50Hz 45mA

OUTPUT: DC 6V 200mA 1.2 VA

Z10

Z10i

Base Adapter

Summary of Contents for Z10 Conference series




































Search results

Summary of Contents for Z10 Conference series

Reviews:

Related manuals for Z10 Conference series

Brands by name

Popular brands

iDect Z10 Conference series, User Manual

Search results

Summary of Contents for Z10 Conference series

Reviews:

Related manuals for Z10 Conference series

Brands by name

Popular brands