background image

1

4.1 

Power on the Handset 

4.2 

Make an External Call 

4.3 

Answer a Call 

4.4 

End a Call 

4.5 

Adjust Earpiece and Handsfree Volume 

USE  YOUR  PHONE

If your handset is turned off press and hold <TALK OFF> to turn on the handset.  

You can press and hold <TALK OFF> again to turn off the handset.

4.2.1 Preparatory 

dialing 

Enter the phone number.

If you enter a wrong number, you can press <Clear> to delete the last digit, or press and hold 

4.2.2 Direct 

dialing 

Press <TALK ON> or <SPEAKERPHONE> to take the line, wait to hear dial tone and then enter 

4.2.3 

Call from the phonebook 

Press <Right Soft key> to access the phonebook and press <UP/DOWN> to select the desired 

phonebook entry (if there are entries stored in the phonebook).  Press <TALK ON> or 

<SPEAKERPHONE> to dial out to the selected phonebook entry.
4.2.4 

Call from the call list 

Press <RIGHT> to access the call list and press <UP/DOWN> to select the desired call list entry 

(if there are entries in the call list).  Press <TALK ON> or <SPEAKERPHONE> to dial out to 

the selected call list entry.  
4.2.5 

Call from the redial list 

Press <DOWN> to access the redial list and press <UP/DOWN> to select the desired redial 

number (if there are numbers in the redial list).  Press <TALK ON> or 

dial out to the selected redial number.   
4.2.6 Call 

timer 

Your handset automatically times the duration of every call.  It is shown in hours, minutes and 

seconds format (HH:MM:SS, on the display during a call.)

If the handset is not on the charging cradle, or if it is on the cradle but Auto Answer (see 8.1.11) 

When the phone rings, press <TALK ON> / <SPEAKERPHONE> / <Accept> to answer a call. 
If the handset is on the charging cradle or the base station and 

Auto Answer 

(see 8.1.11) is set 

to On When the phone rings, pick up the handset to answer a call automatically, without having

During a call press <TALK OFF> to end the call. 

OR 

Put the handset on the charging cradle or the base station or charger pod to end the call. 

5 volume levels (Level 1 to Level 5) are provided for each of earpiece and   

handsfree volume.  

Note: If you have a Z10/Z10i Conference unit the operations are the same as 

a Handset, except that it has no earpiece mode, only a speakerphone mode.

<Clear> to delete all the number.

Press <TALK ON> or <SPEAKERPHONE> to dial the number you have on the display.

the phone number.  

Note: you will not be able to press <Clear> to correct any dialling mistakes.

<SPEAKERPHONE> to 

is set Off:

to press a button.

1

Summary of Contents for Z10 Conference series




































Reviews: