iDect Z10 Conference series User Manual Download Page 23

Page: 23 / 35

Handset Settings

SETTINGS

Your phone comes with a selection of settings that you can change to personalise your phone

operation.

In idle mode:

1. Press <MENU> and <UP/DOWN> to scroll to

Settings

2. Press <Select> and <UP/DOWN> to scroll to

Audio Setup.

3. Press <Select> and <UP/DOWN> to scroll to

Speaker Volume or Ear Volume

(for handset unit only).

4. Press <Select> and <UP/DOWN> or <LEFT/RIGHT> to select the volume level from

level 1 to level 5.

5. Press <OK> to confirm your chosen Speaker or Earpiece volume.

In idle mode:

1. Press <MENU> and <UP/DOWN> to scroll to

Settings

2. Press <Select> and <UP/DOWN> to scroll to

Ring Setup

3. Press <Select> and <UP/DOWN> to scroll to

Internal Ring

4. Press <Select> and <UP/DOWN> to scroll to your desired internal ringer melody (10 ringer

melodies and 5 standard tones are provided).

Note: The respective ringer melody will be played while browsing the melody list.

5. Press <Select> to confirm your internal (intercom) ringer melody.

1. Press <MENU> and <UP/DOWN> to scroll to

Settings

2. Press <Select> and <UP/DOWN> to scroll to

Ring Setup

3. Press <Select> and <UP/DOWN> to scroll to

External Ring

4. Press <Select> and <UP/DOWN> to scroll to your desired external ringer melody (10 ringer

melodies and 5 standard tones are provided).

Note: The respective ringer melody will be played while browsing the melody list.

5. Press <Select> to confirm your external call ringer melody.

In idle mode:
1. Press <MENU> and <UP/DOWN> to scroll to

Setting

2. Press <Select> and <UP/DOWN> to scroll to

Ring Setup

3. Press <Select> and <UP/DOWN> to scroll to

Ring Volume

4. Press <Select> and <UP/DOWN> or <LEFT/RIGHT> to select your desired ringer volume

level from Level 1 to Level 5 or Ringer Off.

Note: The respective ringer volume will be played during your selection.

Volume Off

is selected, the <Ringer Off> icon will be displayed in idle mode.

5. Press <OK> to confirm your ringer volume selection.

A single beep is emitted when you press a key. You can turn this key tone on or off. You can

also turn on the alert tones when low battery and out of range are detected.
1. Press <MENU> and <UP/DOWN> to scroll to

HS Settings

2. Press <Select> and <UP/DOWN> to scroll to

Tone Setup

3. Press <Select> and <UP/DOWN> to scroll to

Key Tone / Battery Low / Out of Range

4. Press <Select> and <UP/DOWN> to scroll to On or Off.

5. Press <Select> to confirm your alert tone setting.

8.1

8.1.1

Set the audio volume

8.1.2

Set the internal ringer melody

8.1.3

Set the external ringer melody

8.1.4

Adjust the Ringer Volume

8.1.5

Set the alert tones

In idle mode:

Summary of Contents for Z10 Conference series




































Search results

Summary of Contents for Z10 Conference series

Reviews:

Related manuals for Z10 Conference series

Brands by name

Popular brands

iDect Z10 Conference series, User Manual

Search results

Summary of Contents for Z10 Conference series

Reviews:

Related manuals for Z10 Conference series

Brands by name

Popular brands