Base Settings
IMPORTANT: When you purchase an iDECT Z10/Z10i system, all handsets are already
registered, and you should not need to de-register a handset unless it is lost or becomes faulty.
Note: You cannot de-register the handset that you are currently using.
1. Press <Menu> and <UP/DOWN> to scroll to
Base Settings
.
2. Press <Select> and <UP/DOWN> to scroll to
Delete HS
.
3. Press <Select> and enter the 4-digit system PIN.
scroll to the handset that you want to de-register.
Note: If handset de-registration is unsuccessful,
“Invalid HS”
will display.
confirm the handset de-registration.
Note: If handset de-registration is successfully done,
“
HS Deleted”
will display.
1. Press <Menu> and <UP/DOWN> to scroll to
Base Settings
.
2. Press <Select> and <UP/DOWN> to scroll to
Dial Mode
.
3. Press <Select> and <UP/DOWN> to scroll to
Tone
or
Pulse
.
4. Press <Select>
1. Press <Menu> and <UP/DOWN> to scroll to
Base Settings
.
2. Press <Select> and <UP/DOWN> to scroll to
Flash Time
.
3. Press <Select> and <UP/DOWN> to scroll to your desired flash time (
Short, Medium, Long
).
4. Press <Select> to confirm your selected flash (recall) time.
A 4-digit system PIN code is used for changing the system settings of the base station and for
registering or de-registering handsets.The default system PIN code is 0000.
1. Press <Menu> and <UP/DOWN> to scroll to
Base Settings
.
2. Press <Select> and <UP/DOWN> to scroll to
Modify PIN
.
3. Press <Select> and you are requested to enter the Old PIN.
4. Enter the old system PIN.
Note: If the old system PIN is incorrect, “
Old PIN Invalid
” is displayed and it will return to
Modify PIN
menu.
5. Press <OK> and enter your new 4-digit system PIN.
6. Press <OK> and enteryour new 4-digit system PIN again.
Note: If the new PIN entered in Step 6 is not matched with the new system PIN entered in
Step 5, "New PIN Invalid" is displayed and you are returned to step 5.
7. Press <OK> to confirm the new PIN.
You can reset your phone to its original default settings. After reset, all your personal base
settings will be defaulted and all answering machine messages deleted, but your
22
8.2
8.2.1
De-register a Handset
8.2.2
Change the dial mode
8.2.3
Change the Flash (Recall) Time
8.2.4
Change the System PIN Code
8.2.5
Reset base settings to default
4. Press <OK> and a list of registered handsets is displayed.
5. Press <UP/DOWN> to
6. Press <Select> to
You should normally leave the dialling mode at its default setting of TONE (also called MF or
DTMF), as this is the standard dialling type in the UK, but it can be changed if your telephone is
connected on an old PBX.
You may need the R button to send a Recall signal (also called Flash or Timed Break Recall) if
you are connected to a PBX or you use BT Calling Features. You should normally leave the
Flash Time at its default setting of Short (100ms), as this is the standard recall required in the
UK telephone network, but it can be changed to Medium (250ms) or Long (600ms) if your
telephone is connected to a PBX.
phonebook, call list and redial list entries remain unchanged.
to confirm your dialling mode selection.
