iDect Z10 Conference series User Manual Download Page 21

Page: 21 / 35

Date & Time

Alarm

CLOCK & ALARM

You can set date and time in different format as well as an alarm time.

In idle mode:

1. Press <Menu> and <UP/DOWN> to scroll to

Clock/Alarm

2. Press <Select> and <UP/DOWN> to scroll to

Date & Time

3. Press <Select> and <UP/DOWN> to scroll to

Date Format

4. Press <Select> and <UP/DOWN> to scroll to your desired date format from

DD-MM-YYYY

MM-DD-YYYY

5. Press <Select> to confirm.

In idle mode:

1. Follow steps 1 to 2 in Section

2. Press <Select> and <UP/DOWN> to scroll to

Time Format

3. Press <Select> and <UP/DOWN> to scroll to your desired time format from

12 Hours

24 Hours

4. Press <Select> to confirm.

In idle mode:
1. Follow steps 1 to 2 in Section

2. Press <Select> and <UP/DOWN> to scroll to

Set Date

3. Press <Select> and enter the date according to the date format you set in Section

4. Press <OK> to confirm and save the new date.

In idle mode:

1. Follow steps 1 to 2 in Section

2. Press <Select> and <UP/DOWN> to scroll to

Set Time

3. Press <Select> and enter the time according to the time format you set in Section

Note: If an invalid time is detected, an error tone will be emitted and the cursor will stay at the

4. If entering the time in 12 hour format, when the cursor is at the AM/PM field,

5. Press <OK> to confirm.

incorrect input.

You can use the handset as an alarm clock. When an alarm is set, the <ALARM Icon>

is shown on the handset display. When the alarm time is reached, the <ALARM icon> and

“

Alarm On

” flash on display, and the alarm melody is played for 45 seconds or until any handset

key is pressed.If the snooze function is activated, the alarm will repeat every 2 minutes, unless

<Off> or <TALK OFF> are pressed while the alarm is sounding.

7.1

7.1.1

Change date format

7.1.2 Change

time

format

7.1.1

7.1.3

Set the date

7.1.1

7.1.1.

7.1.4

Set the time

7.1.1

7.1.2

7.2

Note: If an invalid date is detected, an error tone will sound, the entry will not be saved and you

can try again to enter a valid date.

press <UP/DOWN> to switch between AM or PM.

In 12 hour format the time can be between 01:00 and 12:59.

In 24 hour format the time can be between 00:00 and 23:59.

Summary of Contents for Z10 Conference series




































Search results

Summary of Contents for Z10 Conference series

Reviews:

Related manuals for Z10 Conference series

Brands by name

Popular brands

iDect Z10 Conference series, User Manual

Search results

Summary of Contents for Z10 Conference series

Reviews:

Related manuals for Z10 Conference series

Brands by name

Popular brands