iDect Z10 Conference series User Manual Download Page 25

Page: 25 / 35

scroll to

Barring Numbers

scroll to

Bar Number 1/2/3/4

and enter the number for the selected

Bar Number

Note: Each barring number can include up to 4 digits including “*” and “# ”. Press <Clear> to

delete a digit or press and hold <Clear> to delete the whole barring number.

confirm the number to be barred.

Note: If

Barring Mode

is set to On and

Barring Number

is programmed with at least one

number, your handset will check the first 4 digits of your dialing number with the

programmed barred numbers. If the dialing number matches with any one of the set

barred numbers,

“Call Barred”

will display and the call will be ended.

This function allows you to enter a number which is permitted to be called even when the call

barring function is enabled. You can program up to three 4-digit SOS numbers, to permit the

1. Press <Menu> and <UP/DOWN> to scroll to

Handset Settings

2. Press <Select> and <UP/DOWN> to scroll to

SOS Number

3. Press <Select> and enter the 4-digit system PIN. (Default 4-digit

confirm the PIN

Note: If the PIN code is entered incorrectly, "

PIN Invalid

" will display.

If your handset is registered to more than one base station, you can select which base station

1. Press <Menu> and <UP/DOWN> to scroll to

HS Settings

2. Press <Select> and <UP/DOWN> to scroll to

Select Base

3. Press <Select> and <UP/DOWN> to scroll to your desired base station.

Note: An “*” is displayed next to the currently used base.

4. Press <Select> to confirm.

Note: If the selected base is found successfully,

“Saved”

will display, otherwise,

“Failed”

will display.

You can reset your phone to its original default settings. After reset, all your personal handset

settings will be defaulted , but your phonebook, call list and redial list entries

1. Press <Menu> and <UP/DOWN> to scroll to

HS Settings

2. Press <Select> and <UP/DOWN> to scroll to

HS Default

3. Press <Select> and enter the 4-digit system PIN (Default 4-digit system PIN: 0000)

4. Press <OK> to confirm the PIN.

5. Press <OK> to confirm the handset default.

Note: If the PIN code is entered incorrectly,

“PIN Invalid”

will display.

system PIN is 0000).

to use.

1. Follow steps 1 to 4 in Section 8.1.12.1

8.1.12.2 Set the call barring number

8.1.13 Set the SOS number

8.1.14 Select base station

8.1.15 Reset handset settings to default

handset to dial any telephone numbers beginning with these digits, regardless of barred

4. Press <OK> to

5. Press UP/DOWN to scroll to SOS Number 1/2/3.

Press <Select> and enter the number of up to 4 digits for your selected SOS Number.

Press <OK> to confirm the SOS number.

numbers.

2. Press <UP/DOWN> to

3. Press <Select> and <UP/DOWN> to

4. Press <Select>

5. Press <OK> to

remain unchanged.

Summary of Contents for Z10 Conference series




































Search results

Summary of Contents for Z10 Conference series

Reviews:

Related manuals for Z10 Conference series

Brands by name

Popular brands

iDect Z10 Conference series, User Manual

Search results

Summary of Contents for Z10 Conference series

Reviews:

Related manuals for Z10 Conference series

Brands by name

Popular brands