IDEC SmartRelay FL1A-H12RCE, Manual

Page: 64 / 209

Programming IDEC SmartRelay
3-32
IDEC SmartRelay User’s Manual
3.6.7 Correcting Typing Errors
It is easy to correct typing errors in IDEC SmartRelay:
•
If you have not yet concluded input, you can use ESC to
go back a step.
•
If you have already concluded input, simply start again,
as follows:
1. Move the cursor to the location of the error.
2. Switch to input mode:
OK
3. Enter the correct wiring for the input.
You can only replace one block with another if the new
block has exactly the same number of inputs as the old
one. However, you can delete the old block and insert a
new one. You can insert whichever block you like.
3.6.8 ”?” on the Display
If you have entered a program and want to exit “Edit Prg”
with
ESC , IDEC SmartRelay checks whether you have
wired all the inputs of all the blocks correctly. If you have
forgotten an input or parameter, IDEC SmartRelay displays
the first place at which you have forgotten something and
marks with a question mark all those inputs and
parameters that have not been wired.
Wire the input and enter a value for the parameter. You
can then exit “Edit Prg” by pressing
ESC .
R ?
You have not yet wired the
input here
B01
T ?
Q1
B02
You have not yet specified a
value for the parameter