IDEC SmartRelay FL1A-H12RCE, Manual

Page: 59 / 209

Programming IDEC SmartRelay
3-27
IDEC SmartRelay User’s Manual
Parameterizing a block
Now enter the time T for the off delay:
1. If the cursor is not yet under the T,
move it there: keys or
2. Switch to input mode: OK
IDEC SmartRelay displays the parameter window for
parameters:
B0 2: the parameter of block B02
T: is a time
+ means: the parameter is displayed
in parameterization mode and can be
modified there
B02:T
T=00:00s+
Ti me value
Time unit
The cursor appears on the first position of the time value.
To change the time value, proceed as follows:
•
Use the keys and to move the cursor to different
positions.
•
Use the keys and to change the value.
•
When you have entered the time value, press OK.
Setting the time
Set the time T = 12:00 minutes:
1. Move the cursor to the first position:
or
2. Select ’1’:
or
3. Move the cursor to the second position:
or
4. Select ’2’:
or
5. Move the cursor to the unit:
or
6. Select the unit m for minutes:
or