IDEC SmartRelay FL1A-H12RCE, Manual

Page: 60 / 209

Programming IDEC SmartRelay
3-28
IDEC SmartRelay User’s Manual
Displaying/hiding parameters - type of protection
If you don’t want the parameter to be displayed in
parameterization mode, proceed as follows:
7. Move the cursor to the protection mode::
or
8. Select protection mode ’-’:
or
The following message should now appear on the display:
Type of pro i e
T can be changed in para
meterization m
Type of protection : Time
T cannot be changed in
parameterization mod e
or
T ype of prot
T can be changed in
parameterization mode
T ype of protection -
T cannot be changed in
parameterization mode
B0 2:T
T=12:00m-
B02:T
T=12:00m+
9. Conclude your input:
OK
Checking the program
This branch of the program for Q1 is now complete. IDEC
SmartRelay displays the Q1 output. You can have another
look at the program on the display. Use the keys to move
through the program. Use
or to move from block to
block and use and to move between the inputs on a
block.
Exiting programming mode
Exit program input in the same way you did for the first
program, but just remind you, here is the procedure again:
1. Return to the programming menu:
ESC
2. Return to the main menu: ESC
3. Move ’>’ to ’Start’: keys or
4. Accept Start: OK