manualshive.com logo in svg

IDEC SE2L Series, User Manual

The IDEC SE2L Series is an innovative product that combines efficiency and reliability. To easily set up and operate this product, a comprehensive User Manual is available for download from our website, free of charge. Explore the manual to unlock the full potential of the SE2L Series at manualshive.com.

Share
Download
background image

 

 

SE2L User’s Manual (SE9Z-B1865) 

 

2 

3.10.2 Access protection.......................................................................................................................... 37

 

3.11 Area sequence function...................................................................................................................... 39

 

3.12 Response time .................................................................................................................................... 39

 

3.13 Other outputs..................................................................................................................................... 40

 

3.13.1 Warning output 1 (WARNING 1)............................................................................................... 40

 

3.13.2 Warning output 2 (WARNING 2)............................................................................................... 40

 

3.13.3 Muting output 1 (MUT_OUT 1)................................................................................................. 40

 

3.13.4 Muting output 2 (MUT_OUT 2)................................................................................................. 40

 

3.13.5 Reset Request 1 (RES _ REQ1) .................................................................................................. 41

 

3.13.6 Reset Request 2 (RES _ REQ2) .................................................................................................. 41

 

3.14 Information indicator........................................................................................................................ 41

 

3.14.1 LED............................................................................................................................................... 42

 

3.14.2 7-Segment display ........................................................................................................................ 42

 

3.15 Ethernet communication .................................................................................................................. 43

 

3.15.1 Ethernet Setting ........................................................................................................................... 43

 

3.16 Function to configure SE2L by SD card.......................................................................................... 44

 

3.17 Master-Slave Function ...................................................................................................................... 44

 

4. Application examples of SE2L.................................................................................................................. 46

 

4.1 Access protection (Horizontal application Stationary Protection zone 1) ...................................... 46

 

4.2 Access protection (Stationary Horizontal application with Dual Protection zone)........................ 49

 

4.3 Access protection (Vertical application- whole body detection) ...................................................... 49

 

4.4 Access protection (Vertical application Stationary).......................................................................... 51

 

4.5 Area protection (Horizontal application Mobile) Fixed area .......................................................... 53

 

4.6 Area protection (Mobile, Horizontal, Single Protection, Variable Area) ........................................ 56

 

4.7 Area protection (Mobile, Horizontal, Single Protection, Encoder Input)....................................... 57

 

4.8 Area protection (Mobile, Horizontal, 2 Units Interconnected, Variable......................................... 57

 

4.9 Area protection (Mobile, Horizontal, 4 Units Interconnected, Variable Area) .............................. 58

 

4.10 Area protection (Mobile, Horizontal, Autonomous Navigation) ................................................... 59

 

5. Installation ................................................................................................................................................. 60

 

5.1 Light interference ................................................................................................................................ 60

 

5.2 Mutual interference............................................................................................................................. 61

 

5.3 High reflective background ................................................................................................................ 63

 

5.4 Limited detection capability zone ...................................................................................................... 64

 

6. Wiring......................................................................................................................................................... 65

 

6.1 Precautions........................................................................................................................................... 65

 

6.2 Power supply........................................................................................................................................ 65

 

6.3 Wire color and function ...................................................................................................................... 65

 

6.4 Wiring example.................................................................................................................................... 67

 

6.5 Input/ Output circuit........................................................................................................................... 72

 

Summary of Contents for SE2L Series

























































































































































Reviews:

No comments

Related manuals for SE2L Series

Feig Electronic OBID classic-pro Series Manual preview
OBID classic-pro Series
Brand: Feig Electronic Pages: 126
Canon IRIScan Book 5 Wif Manual preview
IRIScan Book 5 Wif
Brand: Canon Pages: 32
Avision AD345G Series User Manual preview
AD345G Series
Brand: Avision Pages: 183
UMAX Technologies Astra 2000U Owner'S Manual preview
Astra 2000U
Brand: UMAX Technologies Pages: 120
Unisys e-action Source NDP Installation And Operation Manual preview
e-action Source NDP
Brand: Unisys Pages: 111
Scantech X2 Spider Quick Start Manual preview
X2 Spider
Brand: Scantech Pages: 7
YIC Technologies EMProbe User Manual preview
EMProbe
Brand: YIC Technologies Pages: 70
SICK S3000 Expert Operating Instructions Manual preview
S3000 Expert
Brand: SICK Pages: 176
Xerox DocuMate 3115 User Manual preview
DocuMate 3115
Brand: Xerox Pages: 223
Radio Shack PRO-137 Manual preview
PRO-137
Brand: Radio Shack Pages: 23
Faro ScanPlan Manual preview
ScanPlan
Brand: Faro Pages: 162
Magnasonic FS52 User Manual preview
FS52
Brand: Magnasonic Pages: 20
VITALITY CHECK MSRRS SCN05 Quick Start Manual preview
MSRRS SCN05
Brand: VITALITY CHECK Pages: 9
Opticon OPN-3200i Specification Manual preview
OPN-3200i
Brand: Opticon Pages: 31
BMV FarmScan L60 User Manual preview
FarmScan L60
Brand: BMV Pages: 62
SICK ZS3608 Quick Start preview
ZS3608
Brand: SICK Pages: 2
SICK TiM51x Operating Instructions preview
TiM51x
Brand: SICK Pages: 4
SICK TiM31x Operating Instructions preview
TiM31x
Brand: SICK Pages: 4

Brands by name

Popular brands

Load more brands