IDEC SE2L Series Page 31 User Manual Download

Page: 31 / 152

SE2L User’s Manual (SE9Z-B1865)

3.7.3.1 Automatic restart

SE2L will restart automatically when interlock function is disabled or only the start interlock function is

enabled. When obstacle from the protection zone is removed, OSSD signals switch from OFF-state to

ON-state automatically. OSSD response times for ON and OFF states are configurable (See section 3.12).

However, if SE2L is in the lockout state due to error,

OSSDs will remain in OFF-state even if the interlock

function is disabled.

Figure 3-15 Timing chart of automatic restart



In automatic restart configuration OSSD will automatically switch to ON state after

the object is removed. Confirm the safety while removing the object.



Configured response time should be sufficient for the machine or AGV to stop safely.

Summary of Contents for SE2L Series

























































































































































Search results

Summary of Contents for SE2L Series

Reviews:

Related manuals for SE2L Series

Brands by name

Popular brands

IDEC SE2L Series, User Manual

Search results

Summary of Contents for SE2L Series

Reviews:

Related manuals for SE2L Series

Brands by name

Popular brands